Perfactory 4 Mini XL with ERM

Valoración de los usuarios
SLA, Proyector DLP
Fotopolímero, Exclusivo de la marca
Tamaño máximo de impresión:
115x72x230 mm
Espesor de capa:
15 - 150 microns
Tipos de archivo:
Formato de entrega:
85,00 kg
Tamaño de la impresora:
730x480x1350 mm
Alimentación y consumo:
100-120V, 5.4 Amps 220-240V, 2.4 Amps
País de fabricación:

EnvisionTEC’s Perfactory® 4 Mini XL with ERM is a low cost, easy maintenance and user friendly 3D rapid prototype manufacturing system. Using state-of-the-art Direct Light Projection technology from Texas Instruments®, the Perfactory® 4 Mini XL produces the finest detail in the shortest period of time. It creates 3D models that range from the conceptual to the fully functional.

  • Choice of 2 lens sizes: 60 mm or 75 mm
  • Projector Resolution: 1920 x 1200 pixels.


  • Build speed is constant through the build up to 1” (25 mm) per hour at 0.0039” (100µm) voxel thickness
  • Economic material use with no vat.
  • Very few moving parts and minimal consumable components make the system user serviceable
  • Changeover between materials is quick and easy

Utilizing a built in Ethernet interface, the Perfactory® 4 Mini XL with ERM System can connect directly to a PC workstation or be integrated into a network. The Perfactory® 4 Mini XL with ERM System has an embedded PC, which allows the system to work independently from the pre-processing workstation.  The Perfactory® 4 Mini XL with ERM System can be remotely monitored from any computer on the network using the communication software that is integrated into the Perfactory® Software Suite. Any STL data format can easily be converted into voxel data using the Perfactory® Software Suite and then imported into the Perfactory® 4 Mini XL with ERM System to be built.

Materials Available:

  • ABStuff General purpose similar to ABS plastic
  • ABflex - General purpose similar to ABS plastic with flexible characteristics
  • EC500 - Casting
  • HTM Series - High temperature molding, architectural models, plating
  • LS600 - General purpose
  • Photosilver - High temperature applications with fine detail
  • PIC 100 - Casting
  • R5/R5 Gray/R11 - General purpose, master models
  • RCP30/RC31 - High temperature applications

Perfil de empresa

Fabricante de impresoras 3D, Fabricante de consumibles
Desarrollamos, producimos y vendemos impresoras 3D a precios competitivos. Ofrecemos soluciones específicas para clientes y sectores con nuestros...
Brüsseler Straße 51 - Gladbeck - Alemania

Recursos relacionados