BS01 in consideration for the living environment and location of the Japan office, and schools is a high-performance 3D printer that was particular about the accuracy of each part, yet width × depth is small and only 25cm.
The body colorful five colors, it is featureless enclosure colorful MDF plywood, of BS01 using a variety of forest waste, plant waste, house waste, the packaging wastes, etc. recycling possible wood from the process of wood utilization color paint is using environmentally friendly materials such as using eco-friendly paint.
I suppress the clogging of the filament, which is common in low-cost 3D printer with a custom-made, which is produced in Japan in BS01-only, or a nozzle head has been devised which is less susceptible to changes in the environment or room temperature.
In addition, there is a PLA model and ABS / PLA model to BS01. Any type of bed shaping to heating, this is, you can choose a non-heating type.
Modeling method: hot-melt product method (Fused Filament Fablication)
275mm in height 250mm × side 250mm ×: body size
Maximum Build Size: width 150mm, depth 130mm, 100mm height
(All four types of 0.5mm from 0.2mm) 0.4mm Standard: nozzle diameter
Stacking pitch: 0.1mm Recommended
Theoretical resolution of each axis: 0.3 micron z-axis (0.0003mm),
xy axis 14 micron (0.014mm)
Build Speed: head speed (speed at the time of molding) 100mm/sec
Travel speed (air when feeding speed) 200mm/sec
Corresponding OS: Windows 7 or more, Mac OS X
Compatible Software: Repetier Host, Slic3r